Category Archives: Quick project

Another quick project – hair ornament

Image

 

Thanks go to Matt L, who stopped laughing long enough to take this picture after I asked him if he minded “...taking a picture of the back of my head.

I’ve been getting bored recently. After graduating I spent the summer working for a lettings agent who were particularly busy with the annual tide of students departing and arriving. It was nice being lent a car and driving around the local area, as I’ve learnt a lot of routes and seen places that I would otherwise have had no reason to go to. Anyway, that finished a couple of weeks ago and whilst the job kept me physically occupied, my head was relatively underused and as a result I’ve been rather bored. To top it off, my old Uni login no longer works so I can’t occasionally access research papers out of nostalgia (open access excepted, of course).

I began reading a few books, but couldn’t really get into them. One series that I particularly enjoyed during my teens (14-16) was Robert Jordan’s Wheel of Time. I got as far as book 11 and have been picking up the later books as I’ve seen them in charity shops, but have stalled at number 13. One particular, albeit more minor, character that stood out to me was an “Aes Sedai” (think sorceress) named Cadsuane Melaidhrin – an old, strong character that took no stick from anybody, peasant or King (in fact, rumours suggest she’s spanked a few Royals). In particular, she is described as having an assortment of hair ornaments dangling from a bun on the top of her head, which are thought to enhance her powers. Now, mystical powers aside, I’ve always been attracted to shiny things (magpie in a past life?) and the thought of dangling sparkly things from my hair sounded attractive. Of course, I’ll just have to live with constantly needing to untangle rogue strands and the inevitable annoyance of small things bouncing off my skull…

I started looking around on the internet for attractive or unusual hairsticks, as I quickly discovered that holding my fairly long hair in a bun is quite difficult using only pins and a hair band. Also, I’m going to look daft enough with things hanging off my head, so the bun will be in the “normal” place at the back, not on top. A forum dedicated to discussing long hair pointed me towards Ketylo sticks and Etsy – and my sparkly-senses went wild. Unfortunately, all the interesting stuff is in America and Canada and UK VAT (20%) and RM’s handling fee (£8) makes importing such things rather expensive. I nearly spent $100 until I realised that the additional costs of bringing it into the country by post would cost rather a lot – nearly half the cost of the items!

Image

I decided to make something. My first point of call was the Bead Shop in Nottingham’s city centre and I spent far too much buying Swarovski beads and sterling silver findings. If I’m going to make silver jewellery, I don’t want it to turn copper in 18 months time!

Image

I didn’t have a design in mind, as I was making it up as I went along, but I did know I wanted it in silver and I did know I wanted to thread beads onto eyepins (small metal bar which you can loop at both ends). So I sat down and began threading beads onto pins and building a chain of beaded pins and jump rings.

Image

Finally, the accessorised hairsticks I’d nearly bought were clipped to a ring at the not-pointy-end of the stick then clipped onto the other end with a miniature hair grip. I thought that was rather large, so have improvised with the small rubber band and ring set-up you generally tend to see at the ends of spectacle chains. Slightly more discreet, but I could only get white. Ideally I’d like black, but that was all I could get at short notice. So each end of my chain has a trigger clasp, the rubber loop allows one end to hang from the stick and I’ve drilled a small hole through the stick and attached a larger jump ring which allows the other end to be clipped on securely.

Image

Actual working time was probably 3-4 hours, mainly because I had to learn how to bend the eyepins to form a new loop, but partially because the jump rings kept popping open. I reckon I could do it again in 90 mins or less, assuming I had all the parts necessary. It would be nice to solder the jump rings closed, but I don’t have access to the tools for that.

Image

A quick hack… Tron bike!

2013-06-25 21.58.44 2013-06-25 22.42.56…Okay, so not exactly a Tron Bike. But I had a couple of lengths of EL wire to play with and a poor imagination. After a lengthy trawl on Google I decided the easiest way to utilise it would be to outline my bicycle. My partner’s bike was wrapped in EL wire which, whilst glowing like the Blackpool illuminations, didn’t look particularly special in my opinion (sorry, dear). I played about with the length of wire I had and some tape and decided that outlining the frame had a nicer effect than spiralling around it.

The next task involved deciding on a way to attach the wire to the bike. Some “caterpillar” grips had been left with the wire – rubber grips with a sticky backing, into which the EL wire clipped. Unfortunately, despite carefully cleaning the frame with meths before applying the caterpillars they soon detached. I was looking for a method of attaching the EL wire without cable ties, which were messy. I didn’t want anything permanent, or that might damage the paintwork too much should I need to remove the wire for any reason. I settled on Sugru, which claimed to stick to almost anything. It did for a time, but whether I was too stingy with how much I applied or whether the paint was inappropriate as a surface I don’t know, but a good third of the blobs of Sugru soon either detached or broke up.

I then had a stroke of genius. I have no idea where it came from; an overheard conversation? Something I’d read on the internet? But I decided to try hot glue. Now, the internet suggests that EL wire doesn’t respond well to heat and I can quite happily believe the paint or plastic would be easily denatured by hot or prolonged exposure. A brief test on the end of the wire indicated however that the short exposure to the molten resin didn’t appear to have an effect on its ability to glow, or the colour emitted. Given the metal frame would act as a heat sink I was confident that the wire would not be damaged during application. Two weeks later the stuff still sticks and the EL wire still glows, so I appear to have guessed correctly.

Meanwhile, I was trying to work out the optimal way of powering the EL wire. The obvious choice were Li-ion batteries, which are reasonably compact and relatively light (in comparison to a lead acid), but I didn’t know which transformer I had or how much power it would draw. My dad provided the answer; on a rare visit home to my parents we sat down with a multimeter, the EL wire and transformer and an assortment of batteries including some 1.2V AA, a handful of rechargeable and single-use 9V and an old 12V motorcycle battery. We used the mutimeter to measure the voltage provided by the batteries and applied them to the transformer. Obviously the motorcycle battery worked well. To be honest we didn’t even try the AA batteries, as we didn’t have any way of tying a number together. The 9V batteries provided some interesting results, though. The brand-new single use batteries powered the wire nicely, whilst the rechargeable batteries failed to make even a faint glow. Measuring the voltage of the batteries showed around a 0.3V difference between the two groups; the single-use batteries provided around 9.6V, whilst the rechargeables varied between 9.30 – 9.35V, indicating that the wire could be powered successfully from a minimum of 9.6V supply.

The next task was to work out how much current the wire was drawing, and whether this varied between the 1m and 3m lengths of wire I had to hand. In practice there was very little difference; both drew around 0.2A. Coupled with the knowledge that the wire can be supplied by a 9.6V battery, we determined that eight AA batteries would be sufficient to power the wire for, theoretically, anywhere near 10 hours (assuming 2.9Ah batteries were used, allowing for any resistance or wasted energy – the transformers squeal quite nicely at a frequency above 12,000Hz, as my dad was blissfully unaware when I mentioned it). A quick trawl on the internet identified some 2.9Ah AA batteries at around £5 for 4, so I purchased two packs along with a couple of battery holders with built-in switches (about £1 each). I removed one of the switches, wired the holders in series and finished by unceremoniously taping the two together. A terminal block was attached to the two dangling power wires and I inserted the first transformer, switching the power to *on*. Result! As expected, the EL wire illuminated with an eerie glow. I then wondered if two transformers could be run off the same battery pack and added a second one in parallel to the first by screwing an additional transformer into the terminal block. THis gave me an additional glowing wire. Since then, I’ve discovered that you can buy splitters which attach between the wire and the transformer, allowing multiple wires to be powered by one transformer instead of the multiple-transformer setup I have. I may eventually get around to purchasing in order to reduce the number of transformers I’m using. But for the meantime, the entire pack – batteries, transformers and dodgy wiring – fits nicely into my saddle bag with room for a puncture repair kit, my handy set of Allen keys and a couple of nitrile gloves.

And that’s it! The batteries remove easily from the holder and pop into a normal charger and so far I would guess I’ve had around 4hrs use without a charge. I’d like to get my hands on a couple more battery packs, or find a more compact, lighter way of powering the wire (even for a short period of time) so as to completely outline the bike in blue, as I’d like attach two power packs and transformers to the wheel hubs in order to illuminate the rims. It has been done by others before me (google it!) and I’ll most likely lose interest and move onto another project before I get around to doing it (maybe I’ll go back to my Alethiometer table?!).  In the meantime it’s fun to think about. Having been through Google images I also like the idea of integrating EL wire into clothing, such as on a motorcycle jacket or corset (something I previously thought about doing with Lilypad stuff and some conductive thread) and maybe if I had the time, money and a slightly less distracted mind I’d do all of this. But for now, I’m satisfied with my Tron Bike!